Local network is not accessible after installing AVG Plus Firewall Edition.

If you have installed the AVG Plus Firewall Edition, ran the Automatic configuration wizard and then, after the computer has restarted, your local network is not accessible, please check the following configuration:

AVG Control Center->AVG Firewall->Configure->System tab->"Microsoft file sharing and printing"

This application´s default setting is "Block" (for security reasons). If your local network is not accessible or you cannot print on network printers, please re-configure this option to "Allow" (choose "Microsoft file sharing and printing"->click on "Edit rule" button->click on "Edit rule" button)

The correct configuration of the Microsoft file sharing and printing service is very important for your computer's security. Because of this, we recommend that you carefully consider its configuration. We also recommend that you only allow the Microsoft file sharing and printing service for IP addresses of computers that must use this service with your computer, or only for your local network. You can set up your local network in the AVG Firewall configuration as:

• range of secure IP addresses connected to your local network

• IP address/Mask

• one IP address

If you are not sure about these settings, we recommend that you contact your system administrator.